Skip to content
English
  • There are no suggestions because the search field is empty.

UltraBreeze: Replacing the Fan Blade

Replace your UltraBreeze fan blade from inside the attic.

Tools

  • 1/8 in. Allen key

Steps

  1. Unplug the thermal: find the plug hanging from the base of the fan and pull the two black connectors apart. This cuts the solar power to the fan. Pull on the connectors, not the wires.
  2. Loosen the 1/8 in. Allen screw on the blade's hub.
  3. Pull the old blade straight off the motor shaft. The blade edges can be sharp.
  4. Slide the new blade onto the shaft with the Allen screw lined up on the flat side of the shaft. The hub should sit flush with the end of the shaft.
  5. Tighten the Allen screw. Don't bend the blade.
  6. Make sure nothing is in the blade's way, then plug the thermal back in. Push the connectors together until no metal shows between them.

Need help? Contact UltraBreeze technical support at support@atticbreeze.com or (254) 865-9999, Monday through Friday, 8 AM to 5 PM Central.